Bridge Mode –
When selected, this AP (Access Point) adapter acts as a wireless bridge
between two or more network segments and will not respond to wireless requests.
WDS Mode:
Select
Bridge Mode
from the drop-down menu.
Phy Mode and
Encryption Type:
Please refer to page 44 for setup details.
AP MAC Address:
Enter the associated AP’s MAC Address(s) in the respective textbox(s). It is
important that your peer’s AP must include your MAC address in order to acknowledge and
communicate with each other.
Note: MAC address should be entered in the following format, aa:bb:cc:dd:ee:ff
Repeater Mode –
When selected, this AP adapter acts as a repeater (relay) and interconnects
between APs.
WDS Mode:
Select
Repeater Mode
from the drop-down menu.
Phy Mode and
Encryption Type:
Please refer to page 44 for setup details.
AP MAC Address:
Enter the associated AP’s MAC Address(s) in the respective textbox(s). It is
important that your peer’s AP must include your MAC address in order to acknowledge and
communicate with each other.
Note: MAC address should be entered in the following format, aa:bb:cc:dd:ee:ff
43
