Innoband 8520-C1, User Manual

Page: 7 / 96

8520-C1 User Manual
1
1
Introduction
Congratulations on becoming the owner of the 8520-C1 , ADSL2+ Wireless Gateway.
You will now be able to access the Internet using your high-speed DSL connection.
This User Manual will show you how to connect your 8520-C1 ADSL2+ Wireless
Gateway, and how to customize its configuration to fit into the network.
Features
The list below contains the main features of the device and may be useful to users
with knowledge of networking protocols. If you are not an experienced user, the
chapters throughout this guide will provide you with enough information to configure
your device to fit into the network.
The features include:
z
Compliant with ITU-T G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3
(G.dmt.bis/ADSL2), G.992.5 (ADSL2+) and ANSI T1.413 Issue 2; compatible
and interoperable with major Central Office side ADSL DSLAM or Multi-service
Access System
z
ADSL2+ compliance raises downward link rate up to 24 Mbps and
enhanced upstream rate up to 3 Mbps* per ADSL2/2+ Annex M *Actual
maximum rate depends on network configuration and operating conditions
z
Enhanced performance of Impulse Noise Protection to ensure video
streaming over copper wires
z
802.11g WLAN supports up to 54Mbps transmission rate as well as Wi-Fi
WEP/WPA/WPA2 for data security
z
Build-in four-port 10/100 Base-TX Ethernet switch for PC or LAN
connection, supports automatic 10/100M speed-sensing and MDI/MDI-X
crossover detection-and-correction
z
RFC2684 /1483 bridged and routed PDU encapsulations over ATM over
ADSL support bridging, MER, IPoA, PPPoA and PPPoE
z
Interchangeable between Bridge or Router mode
z
Supports 802.1Q tagged VLAN and 802.1p as well as standard compliant
IP QoS for multiple services / triple play deployment
z
Configuration and management locally or remotely via CLI/Telnet, web,
SNMP or DSL Home
™
z
Firmware upgradeable through TFTP or HTTP