8520-C1 User Manual
41
IP Filter Settings
To specify the IP filter settings:
Enable/disable the IP filter by selecting
Enabled/Disabled
.
Click
Apply
.
Or you may Add/Edit/Delete the filtering rule. Click to configure the filtering rule.
Figure 43 : IP Filtering Settings
Global settings:
Enter the name of filter rule in
Filter Rule Name
.
Select the filter policy from the
Select Policy
drop down list.
z
The ext-int means the path is between the WAN port and LAN ports including
WLAN.
z
The ext-dmz means the path is between the WAN port and the specified DMZ
port.
z
The dmz-int means the path is between the specified DMZ port and other LAN
ports.
Select one of the options for the packet direction:
Outbound traffic, Inbound traffic,
or Both.
Select
the
Protocol,
TCP, UDP, ICMP or GRE.
Select
the
Filter Action
: Allow or Deny.
Enter
Source IP Range
of the packet
.
Enter
Destination IP Range
of the packet.
Summary of Contents for 8520-C1
Page 6: ...8520 C1 User Manual VI 18 Appendix G Regulation 87 19 Appendix H Contact Information 90...
Page 59: ...8520 C1 User Manual 53 Advanced Figure 58 View Advanced Raw Ethernet Port Parameters...
Page 61: ...8520 C1 User Manual 55 Advanced Figure 60 View Advanced DSL Port Parameters...
Page 63: ...8520 C1 User Manual 57 Advanced Figure 62 View Advanced Wireless Port Parameters...
