8520-C1 User Manual
50
time reference, required only to adhere to the specified Periodic Inform Interval.
The value of
ParameterKey
argument from the most recent SetParameterValues,
AddObject, or DeleteObject method call from the ACS. If there have been no
such calls, this value is empty.
Enter
the
Connection Request URL
link which ACS uses it to make a connection
request notification to the device.
Enter
the
Connection Request Username and Password
which ACS uses it to
make a connection request notification to the device.
Select enable or disable for
Upgrade Managed
, it indicates whether or not the
ACS will manage upgrades for the device. If it is enabled, the CPE should not
use other method to upgrade firmware. If it is disabled, the device may use other
method.
Select enable or disable for
ACS Discovery
, it indicates whether or not the device
must enable the ACS Discovery from DHCP.
Click
Apply
.
CWM Parameters
This page allows you to configure CWM Parameters which are related to the CWMP
(TR-069) application.
Figure 56 : CWM Parameters Configuration
Global settings:
Select the type of
CRN Auth Type
from the list, None or Digest. It is the type of
authentication issued by the device for Connection Request Notification.
Select the enable or disable of
CWM
, it indicates the CWM (TR-069) application
is enabled or disabled.
The following parameters are read-only and described as below.
Summary of Contents for 8520-C1
Page 6: ...8520 C1 User Manual VI 18 Appendix G Regulation 87 19 Appendix H Contact Information 90...
Page 59: ...8520 C1 User Manual 53 Advanced Figure 58 View Advanced Raw Ethernet Port Parameters...
Page 61: ...8520 C1 User Manual 55 Advanced Figure 60 View Advanced DSL Port Parameters...
Page 63: ...8520 C1 User Manual 57 Advanced Figure 62 View Advanced Wireless Port Parameters...
