8120-B1 User’s Guide
Step 1. Connect the WAN port to ADSL network
Using the phone cable (RJ-11), connect the WAN port to the ADSL network which has
the high speed internet connection.
Step 2. Connect the Ethernet cable
Connect up to four single Ethernet computers or to a HUB/Switch directly to the
device via Ethernet cable(s).
Note that the cables do not need to be crossover cables; the switch provides MDI and
MDIX auto-detection.
Step 3. Attach the power connector
Connect the power adapter to the power jack on the back of the device and plug the
adapter into a wall outlet or power strip. Turn on and boot up your computer(s) and
any LAN devices such as hubs or switches. Also, turn on the device by pressing the
on/off button; the PWR LED and ACT LED should be lit green.
Step 4. Configure your Ethernet PCs
You must also configure the Internet properties on your Ethernet PCs. See
Configuring Ethernet PCs section.
Next step
After setting up and configuring the device and PCs, you can log on to the device by
following the instructions in “Getting Started with the Web pages” on chapter 4. The
chapter includes a section called Testing your Setup, which enables you to verify that
the device is working properly.
7
