8120-B1 User’s Guide
Click
Add
to add the static route path.
Check
Remove
and click
Remove
to remove the specified entry.
Figure 48: Add Static Route Configuration
Global Settings:
Enter
the
Destination Network Address
and
Subnet Mask
(range).
Check
Use
Gateway IP Address
and enter the
IP address
where packet will be
forwarded to.
Check
the
Use Interface
and select it from the list.
Click
Save/Apply
to save the configuration.
RIP
This web page is shown only when there is at least a PVC in router mode.
Figure 49: RIP Configuration
Global Settings:
Select
Enabled
to activate this RIP service.
Select the desired
RIP version
and
operation
, followed by placing a check in the
'Enabled' checkbox for the interface.
Click
Save/Apply
to save the configuration.
39
