H T1
T2
−7−
Close the lever. Turn the adjuster knob as the
arrow indicates (or clockwise) to align the
centers of both hooks and the base rack.
2
Place the bottom plate on the slit of the
base rack installation portion.
1
-1
Lift the lever of the memory mount open.
Insert the hooks into the slit so they hold the
base bar.
The lever can face either direction.
1
-2
If the space between the hooks is too small,
make the space wider with the adjuster
knob.
1
-3
Installation of the Rod Box
4
Memory mount
Lever
Base bar
Adjuster knob
Adjuster knob
Hook
Base bar
Hook
Bottom plate
Slit
Dimensions of installation hardware
H :
³⁄4”
to
1
³⁄8”
T1 : Distance to the roof
Allow minimum
2
¹⁄8”
T2 : Allow minimum
1”
*Cannot be installed onto round bars.
1” to 3 ¹⁄2”
Mountable bar dimensions
This rod box is mountable onto genuine base racks and crossbars of the vehicle manufacturer, as
well as the INNO crossbars. Make sure to install the base rack and/or crossbars securely.
To facilitate the widening of the space, detach the memory
mount from the body.
Check vehicle or base rack product instructions to confirm that the base rack to which this product is to be installed has
sufficient strength to support this product. If the base rack does not have sufficient strength to support this product, do
not install.
Warning
Note