−5−
Knob bolt
Joint nut
Joint bolt
Knob nut
Cover
Bottom
Attach the four frames to Bottom A and C by firmly bolting the hexagonal concave bolts in
all the 12 locations, holding the longer end of the hex wrench to tighten.(4Nm)
6
Stick the specification sticker described in your language.
7
Hexagonal concave bolt
Specification sticker in your language
4Nm
Note
Insert the joint bolt from the outside of Cover A and C. Fixate it on the inside with the knob
nut to Cover B.
9
Align the hole on the flange portion of Bottom A and C with the convex shape on the joint
nut center. Fixate from the inside using the knob bolt.
8
Joint nut
Convex shape
When assembling each Body, start at the hinged portion to attach the joint nuts
and the knob bolts more easily.
Note
Inserting the bolts may be difficult as the joint nuts and the knob nuts have a rubber washer to prevent loosening.
When attaching, turn the knob while pressing it lightly to tighten.
Note
Body
