Inner Range Integriti Elite, User Manual

Page: 20 / 32

18
Integriti Integriti
Integriti Integriti Integriti
LCD Terminal Keypads User Manual.
Activating a “Panic” Alarm.
Your system may be programmed to allow a Panic alarm to be activated from an LCD
Terminal without logging on. The resulting action and display will depend on how this
feature is programmed in your system.
Consult your Installer to detemine if the
Panic function is enabled and how it will operate.
 
  

   
 
 



  
Press the <HELP> key three times in a row at any
LCD Terminal that has the Panic option enabled.
The messages shown opposite will be shown in
turn with the first and second presses of the
<HELP> key.
Press the <END> key to abort if you pressed the
Help key a second time accidentally.
Activating a “Duress” Alarm.
Your system may be programmed to allow a Duress alarm to be activated if you are
being forced to perform operations at an LCD Terminal against your will.
Duress is activated by simply entering a special PIN Code instead of your normal PIN
Code, when logging on to the LCD Terminal.
See “LOGON to an LCD Terminal”.
The resulting action will depend on how this feature is programmed.
Typically a “Silent” alarm is activated. (A discreet alarm report is sent to the remote
monitoring station)
IMPORTANT NOTE: Consult your Installer:
- To detemine if the Duress Code function is enabled in your system.
- For details of any Duress Codes that will be used.
- For details of how the Duress Code function will operate &/or report.
, ,