Inner Range Integriti Elite, User Manual

Page: 12 / 32

10
Integriti Integriti
Integriti Integriti Integriti
LCD Terminal Keypads User Manual.
LOGON to an LCD Terminal.
- ,
Enter your secret PIN Code using the digit keys,
then press the <OK> key. Each digit pressed will
be displayed as a hash (#) character.
If you make an error while entering your PIN code,
press the <END> key and start again.
If there are no messages to be acknowledged, the
Display may first greet and identify you.
Note: Greeting can be disabled if required.
If there is a message to be acknowledged, refer to
“Acknowledge an Alarm”.
The status of the first Area (or Area List) that you
are allowed to control is displayed, with a prompt to
perform an ON or OFF operation.
When your operations are complete, you must
Logoff the Terminal by pressing the <END> key.
 
 



 

    


 

Logging on is the first step performed in MOST operations.
 
  
ALARM SYSTEM OPERATIONS
User operations are the basic day-to-day operations performed on the system such as
Arming/Disarming, Acknowledging Alarms, viewing the Event Log, etc.
Most User operations begin with the same simple Logon procedure described below.
When this is done, the system verifies the User and depending on the operations
allowed, the User is then able to press another key to select or perform the operation
required.