40
Sequential Time (SEC)
: This refers to the sequencing time when auto-sequence is enabled.
Values can be set from 1-300 seconds.
Spot time (For 16-CH DVRs)
: Set sequential time for spot out from this field.
Privacy Zones
Channel
: From this field, select one channel whose area coverage will be set up in the
following field (Area Covered).
Area Covered:
From this field, users can define areas for privacy masking. This device can
provide up to four privacy masking areas for each channel.
5.5 Network
To access the “Network” menu, move the
cursor over the “NETWORK” tab (the tab
will be highlighted when selected), and
press “Enter.” Users can use this menu to
set up the network, DDNS, email and
mobile phone access to video recorded by
the DVR, and an IP address.
5.5.1 Network
After selecting an Internet connection setting - such as static, DHCP, or PPPoE – and allocating
a port, users can access the DVR remotely via the Internet.
1) If static allocation has been selected, it is necessary to set up an IP address, a subnet mask, a
gateway, and a Web port.
MEDIA PORT:
Transfers video data between the client and the device.
The default number is “9000”
WEB PORT:
Sets up a Web browser port via HTTP.
The default number for the Web port is “8090”, but the specific number is model-dependent.
SETUP PORT:
This port is fixed and cannot be modified; The default number is “8000”.
DNS:
After pressing “Enter,” input numbers for the subnet mask in this field.
Summary of Contents for inDVRL408RTN
Page 81: ...80...
