5
6. Attach the antenna to the pole mount using the supplied wing nuts and washers, as
shown in the diagram below:
7. Attach the U-clamp assembly to the pole mount, as shown below:
8. Attach the pole mount to a suitable above decks
mast or mounting point, using the outer U-clamps.
Small tolerances in the mast diameter can be
compensated for simply by bending the U-clamps
slightly.
9. Run the antenna cable to the below decks location
of the connection box.
Installing the connection box
The connection box provides power for the antenna and handset terminal. Install it
in a suitable enclosed below decks location; for example, in a cupboard. It must be
sheltered from the wind, and protected from water, salt and humidity.
The connection box has four ports, indicated in the diagram below:
