CTL101 QUICK START
This section provides basic, step-by-step directions for installing the CTL101 Control Interface.
Additional instructions can be found on page 3, and Application Diagrams are provided on pages
7 - 11.
1. Set the Dipswitches (if applicable). Dipswitch settings are discussed on pages 13 & 14.
2. Install the CTL101 Interface at the desired location, making sure that the IR sensor window
remains unobstructed (available mounting hardware is listed on page 24).
3. Connect the Computer Serial Port to the RS-232 / RS-422 / RS-485 Serial Port Input.
Wiring Diagrams are provided on pages 4 - 6 and a front and rear panel Connectors &
Controls Diagram is included on page 13.
4. Installation Options:
Connect the INLINE IN1402 / IN1403 / IN1404 Video Scaler, IN3600 Series Switcher
or IN31608 Matrix to the RS-232 / RS-422 / RS-485 Serial Output Port.
For Contact Closure: Connect all switches to the Contact Closure Input Ports.
For applications involving IR controlled products: Connect the CTL130 IR Emitter
to the CTL101 IR Out Port. The mouse type emitter attaches directly over the unit’s IR
sensor (when used to control a single unit) or can be mounted up to three feet away when
used to control multiple units.
For Remote Sensor Applications: Connect the CTL131DB / CTL131DW IR Remote
Sensor to the CTL101 IR Sensor Input Port. The sensor can relay signals up to 1000
feet. Set the Sensor Mode Button to the EXT position.
5. Turn on the computer / control system and all other devices connected to the CTL101.
6. Apply power to the CTL101 using the IN9230 power cord. The front panel power LED will
illuminate.
7. Set-Up the Terminal Emulation Program: Users can access the Set-Up Menu by typing an
asterisk (*). Complete details are provided on pages 16 - 22.
CTL120-2 REMOTE OPERATION
CTL120-2 IR Remote Control sends infrared commands to the CTL101. The CTL101 will
convert these IR signals to serial commands so you can control functions on IN1402 / IN1403 /
IN1404 Video Scalers, IN3600 Series Switchers and IN3808 / IN20804 / IN21608 / IN31208 /
IN31608 Matrix Switchers. A diagram outlining the location and function of each button is
provided on pages 27 - 29.
Press the appropriate device selector button: Video Scaler, Switcher
or Matrix (located along the top edge of the remote control) before
executing any commands.
Summary of Contents for CTL101
Page 1: ...CTL101 CONTROL INTERFACE CTL 1 0 1 OPERATION MANUAL...
Page 4: ......
