TILT Assembly Manual
Code No.: MD03001-00-1107
4
Step 3
Mount all four arm
supports with the
tensors on the base
plate. On each arm
support, use only the
inner screws now.
NOTE
: pay attention to
the position of the
tensors. The base plate
has in its design a couple
of ‘arrows’ marking the
forward direction (in
picture top is front). In
that orientation the
tensors must both be on
the left.
PARTS
Same as step 2
1x base plate
4x 20 mm aluminum standoffs
HARDWARE
4x screw M3x20 (PRO version)
4x screw M3x25 (3DP version)
