TILT Assembly Manual
Code No.: MD03001-00-1107
12
Step 11
Solder the pin headers
to the Naze flight
controller board as
shown in the pictures
with the black Naze32
board (headers
supplied). Cut the Nylon
screws to about 6 mm
long and install the
standoffs in the flight
controller.
If you want a low
profile headers setup,
you can use the red
Naze pictures as
example (rubber
dampeners not
included in the kit)
PARTS
1x Naze32 flight
controller board
HARDWARE
4x screw Nylon M3x12
(to be vut to about 6 mm
long)
4x standoff Nylon 10 mm
long Nylon
