TILT Assembly Manual
Code No.: MD03001-00-1107
3
Step 2
Install both tensors, one
on a right-hand arm
support and the other
in a left-hand one. Do
not tighten them yet.
NOTE
: you’ll find a
regular washer for M3
to use instead of the red
aluminium parts in the
picture
PARTS
Same as step 1
2x polymer bearings (small
ones)
HARDWARE
2x screw M3x30
2x lock nut M3
4x washer for M3
2x split washer for M3
2x 10mm Nylon cylinder
