8
Adjusting the stroke length
The Dragonfly X2 Eccenter can be adjusted between 3 different fixed stroke lengths simply
by loosening one screw and twisting the Eccenter pin 90 or 180 degrees for the desired stroke.
The stroke lengths are 2.6mm, 3.7mm (standard) and 4.5mm. To properly change the stroke
length and make service work on your own you will need the Precision tool kit
. The
Dragonfly is normally delivered with the 3.7mm stroke as standard.
Precision tool kit
The Eccenter pin has a groove in the front end to accept the flat screw driver from the tool kit.
You will also need the smallest hex key in the tool kit to loosen the screw that holds the
Eccenter pin.
0.9mm Hex key
Eccenter
Flat screw driver
Eccenter pin
