![background image](http://html1.mh-extra.com/html/inkmachines/dragonfly-x2/dragonfly-x2_manual_2061834021.webp)
21
Disassemble instructions
1.
Remove the Cap
by pulling it off. Unscrew the Adjustment screw
and take
out the Inner piston spring
.
2.
Use the matching Allen key
to loosen the Piston screw
in the Inner piston
.
Take out the Needle bar pin
.
3.
Push out the Inner piston
and pull out the Noise damper O-ring
from the
bottom of the Piston
.
4.
Refit only the Adjustment screw
a few turns and push the Piston assembly
down to the bottom position by pushing on the top of the adjustment screw.