18
The Needle bar pin
suspension (give) is out of sync
with the piston
movement.
The Inner piston
needs
lubrication.
The Inner piston spring
is defect or fatigue.
Lubricate.
Replace. Use the disassemble
instructions no. 1. Or stretch the
existing spring.
The Motor
loses power in
a certain angle but will start
when helped.
The Motor
is defect.
Use the disassemble and assemble
instructions as reference or contact
InkMachines for service.
The needle stops in random
position and not in its upper
position like it should.
The Stay up spring
is
broken.
Replace.
The Cap
pops off or
unscrews itself during
tattooing.
The hexagon of the
Adjustment screw
is
damaged and pivots inside
without the cap following.
Remove the Cap and replace the
Adjustment screw