Inkbird Tech. Co., Ltd. www.ink
UX=C:
if set to C in current stage, when completed the continuous timer, there ill be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
displaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds but still
controlling the temperature of current stage, only by pressing any button will go to the
next stage control.
UX=S:
if set to S in current stage,when completed the
alarming with PV screen displaying the current stage value UX(UX=01~12) and SV screen
displaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds with all
output control turned off, only by pressing an
6.2.7 Cycle and Auto Mode (MD, AT)
MD:
value to set
the operation time of timer and temperature set values, 00:
1~999
: specific time of operation. The default value is 1, means the controller will st
running after a one time operation with the set values.
AT:
value to set the operation mode when re
the controller will stop working when re
setting values by entering the menu, the controller will restart working after re
AT=1:
Auto mode. When there
; when re-plug in, the controller
plug based on the operation
rresponding stage.
For example, set S01(Stage
=0 or A; if there is a 3 hours
hours, in this case, the controller
re-
plug in, if U01=n or A, the controller
stop working on Stage 1 with
7. Error Description
Sensor fault alarm
:
when temperature sensor being in short circuit or open loop, the
controller will initiate the mode of sensor fault, and cancel all the
alarming with displaying ER
normal working mode after remove the sensor fault.
ITC-310T
Inkbird Tech. Co., Ltd. www.ink
18
if set to C in current stage, when completed the continuous timer, there ill be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
splaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds but still
controlling the temperature of current stage, only by pressing any button will go to the
if set to S in current stage,when completed the continuous timer, there ill be
alarming with PV screen displaying the current stage value UX(UX=01~12) and SV screen
displaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds with all
output control turned off, only by pressing any button will go to next stage control.
6.2.7 Cycle and Auto Mode (MD, AT)
the operation time of timer and temperature set values, 00:
: specific time of operation. The default value is 1, means the controller will st
running after a one time operation with the set values.
value to set the operation mode when re-plug after power off. AT=0: Manual mode,
the controller will stop working when re-plug after power off; user need to reset the
g the menu, the controller will restart working after re
there is a power failure or outage,the timer will continue
controller will automatically count the time during power
operation time and status of H01~H12 and U01~U12, then
S01(Stage 1)=25.0C
℃
, H01=4H, S02(Stage 2) =30.0
℃
，
hours power failure when the controller has worked
controller will default the 2+3=5 hours to the operated
controller will work on Stage 2, if U01=C or S, the
with alarming.
Error Description
when temperature sensor being in short circuit or open loop, the
controller will initiate the mode of sensor fault, and cancel all the operations
ER code. Press any keys can stop the alarm, and return to the
normal working mode after remove the sensor fault.
310T User Manual
Inkbird Tech. Co., Ltd. www.ink-bird.com
if set to C in current stage, when completed the continuous timer, there ill be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
splaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds but still
controlling the temperature of current stage, only by pressing any button will go to the
continuous timer, there ill be
alarming with PV screen displaying the current stage value UX(UX=01~12) and SV screen
displaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds with all
y button will go to next stage control.
the operation time of timer and temperature set values, 00: infinite cycle;
: specific time of operation. The default value is 1, means the controller will stop
plug after power off. AT=0: Manual mode,
plug after power off; user need to reset the
g the menu, the controller will restart working after re-plugged.
continue to work
power off and re-
then run to the co
，
H02=6H, U02
on Stage1 for 2
operated time; when
the controller will
when temperature sensor being in short circuit or open loop, the
operations. Buzzer
ny keys can stop the alarm, and return to the
