Inkbird Tech. Co., Ltd. www.ink
Delay time will be calculated right after the moment when device stop working.
6.2.4 Temperature Calibration (CA)
When there is temperature off
user can set CA for calibration
temperature value.
The calibrated temperature = the
(positive value, 0 or negative value)
6.2.5 Display in Fahrenheit or Centigrade unit (CF)
Users can select the temperature reading
the default setting is in Centigrade.
Fahrenheit, then set CF to F.
Attentions: when CF value changed, all the setting will be recovered to factory d
setting.
6.2.6 Timer-Temperature Set Values
U01~U12)
TR:
a value to set timer, set to 0, timer off and set to 1, timer on. When TR=0, timer
function will be off, there will not display the other set values follow TR and no need to set
them; when TR=1 or TR=2, timer function will be activated, user can set the time and the
control temperature values as required, with these settings, TS will be invalid and the the
controller will work based on the set temperature of the timer stages.
UT:
a value to set the time unit, can be set to day, hour or minutes as required.
STT:
a value to set stages of controlled temperature, can be set to max 12 stages: 12
temperature set values and each temperature set value respectively corresponded to a
continuous periods of time; when need to control different temperature in different time,
SST can be set to max 12 stages with 12 temperatures as required.
SST:
a value to set start stage to control temperature, can be set to the required stage to
start the temperature control.
S01~S12:
values to set the desired controlled temperature, when TR=1, the values of
S01~S012 will replace the TS value as the temperature control values.
H01~H12:
values to set continuous timer, if UT (time unit) set to hour and set H01 to 1
then the controller will control the set temperature of S01 for 12 hours.
U01~U12:
values to set the alarm, set to n=NO Alert; A=Alert; C=Confirm and S=Stop
Program.
UX=n:
if set to n in current stage, when completed the continuous timer, the controlli
will go to the next stage without alarming.
UX=A:
if set to A in current stage , when completed the continuous timer, there will be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
displaying the A in 1Hz flickering.
go to next stage control.
ITC-310T
Inkbird Tech. Co., Ltd. www.ink
17
be calculated right after the moment when device stop working.
Temperature Calibration (CA)
temperature off between measured temperature and actual temperature,
CA for calibration to get the measured temperature value same
temperature = the measured temperature value + calibration value
(positive value, 0 or negative value)
Display in Fahrenheit or Centigrade unit (CF)
the temperature reading in Fahrenheit or Centigrade temperature value
Centigrade. If need to change the temperature reading in
set CF to F.
Attentions: when CF value changed, all the setting will be recovered to factory d
Temperature Set Values
( TR, UT, STT, SST, S01~S12, H01~H12,
a value to set timer, set to 0, timer off and set to 1, timer on. When TR=0, timer
function will be off, there will not display the other set values follow TR and no need to set
hem; when TR=1 or TR=2, timer function will be activated, user can set the time and the
control temperature values as required, with these settings, TS will be invalid and the the
controller will work based on the set temperature of the timer stages.
value to set the time unit, can be set to day, hour or minutes as required.
a value to set stages of controlled temperature, can be set to max 12 stages: 12
temperature set values and each temperature set value respectively corresponded to a
us periods of time; when need to control different temperature in different time,
SST can be set to max 12 stages with 12 temperatures as required.
a value to set start stage to control temperature, can be set to the required stage to
ature control.
values to set the desired controlled temperature, when TR=1, the values of
S01~S012 will replace the TS value as the temperature control values.
values to set continuous timer, if UT (time unit) set to hour and set H01 to 1
then the controller will control the set temperature of S01 for 12 hours.
values to set the alarm, set to n=NO Alert; A=Alert; C=Confirm and S=Stop
if set to n in current stage, when completed the continuous timer, the controlli
will go to the next stage without alarming.
if set to A in current stage , when completed the continuous timer, there will be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
displaying the A in 1Hz flickering. Buzzer will be alarm shortly in every 2 seconds and then
310T User Manual
Inkbird Tech. Co., Ltd. www.ink-bird.com
be calculated right after the moment when device stop working.
temperature,
same as the actual
+ calibration value
eit or Centigrade temperature value,
the temperature reading in
Attentions: when CF value changed, all the setting will be recovered to factory default
( TR, UT, STT, SST, S01~S12, H01~H12,
a value to set timer, set to 0, timer off and set to 1, timer on. When TR=0, timer
function will be off, there will not display the other set values follow TR and no need to set
hem; when TR=1 or TR=2, timer function will be activated, user can set the time and the
control temperature values as required, with these settings, TS will be invalid and the the
value to set the time unit, can be set to day, hour or minutes as required.
a value to set stages of controlled temperature, can be set to max 12 stages: 12
temperature set values and each temperature set value respectively corresponded to a
us periods of time; when need to control different temperature in different time,
a value to set start stage to control temperature, can be set to the required stage to
values to set the desired controlled temperature, when TR=1, the values of
values to set continuous timer, if UT (time unit) set to hour and set H01 to 12,
values to set the alarm, set to n=NO Alert; A=Alert; C=Confirm and S=Stop
if set to n in current stage, when completed the continuous timer, the controlling
if set to A in current stage , when completed the continuous timer, there will be
alarming with PV screen displaying the current stage value UX(X=01~12) and SV screen
Buzzer will be alarm shortly in every 2 seconds and then
