Inivos ProXcide User Manual Download Page 57

Page: 57 / 57

User manual

V4.0

28.

When safe, unplug the

process monitor power

cable and stow

29.

Return process monitor

to main unit and click in

place

30.

Remove ProXcide, Vent-

Kit, CapKit and DVI Tape

from the room

31.

Return room to normal

layout, ready for use

32.

Request sign-o

for

complete process from

Authorising Signatory

17.

Exit room, close and seal

the final door with DVI

Tape, apply signs

18.

Present and hold

operator card at the

process monitor

19.

Follow the on-screen

instructions

20.

Secure authorisation to

start the process

21.

Start the process by

selecting ‘YES’

22.

Do not re-enter the

treatment area until

process is complete

23.

The red button stops

the process - but you must

still wait for the green light

before entering the room

24.

Wait for the deactivation

process to complete

25. Pause the deactivation

phase

27. If the room is safe to enter,

press ‘deactivation complete’.

If greater than 1ppm, select

‘continue deactivation’ and check

again later. If the room requires

additional deactivation time,

ensure that the room has been

resealed and press confirm

26. Check H

level is safe

using gas monitor. If less

than 1ppm, the room is

safe to enter

ProXcide Quick Reference Guide

Page 2/2

United Kingdom

Maple House, Hamlin Way,
King’s Lynn, PE30 4NG

United States of America

36 Commerce Street,
Spring

ﬁ

eld,New Jersey, 07081

Australia

24 Sorbonne Crescent,
Canning Vale,Perth, WA

New Zealand

12 Huia Road, Otahuhu,
Auckland, 1640

www.Inivos.com

Contact Details:

Inivos Ltd.
Maple House, Hamlin Way, King’s Lynn, PE30 4NG

0330 0583946

0845 270 3334

[email protected]

www.inivos.com

VAT Reg: 996080088

Ltd: 2010

Company Reg No: 07183575

Certifications:

All works, whether textual, pictorial or illustrative contained within this document,
(including any amendments or updates made to the document), shall be, without
limitation, protected by the full force and e

ect of the Copyright Designs & Patents

Act (UK) 1988, (as amended). Any infringement of whatsoever nature of the
provisions of that Act will result in legal action being pursued.

Summary of Contents for ProXcide


























































Search results

Summary of Contents for ProXcide

Reviews:

Inivos ProXcide, User Manual, Page: 57 / 57

Search results

Summary of Contents for ProXcide

Reviews: