G
. BEFORE OPERATION
· 7 ·
WHEN DRIVING
Keep the volume level low enough to be
aware of road and traffic conditions.
WHEN CAR WASHING
Do not expose the product to water or
excessive moisture. This could cause
electrical shorts, fire or other damage.
WHEN PARKED
Parking in direct sunlight can produce very
high temperatures inside your vehicle.
Give the interior a chance to cool down
before starting playback.
PLACEMENT
Put the unit where ventilation is good
enough to prevent overheating.
Never put the unit in direct sunlight or near
heat sources.
Put the unit horizontally, never put any
heavy object on the unit.
To protect the laser, do not put the unit
where there is most dust. If there is dust
on the laser, use a cleaning disc to clean it.
Refer to the operation instructions of
the cleaning disc you bought.
CONDENSATION
Water will appear on the pickup lens in
the following cases:
The unit is suddenly moved from a cold
place to a warm place.
The unit is put in a room with a heater, or
in the cold air from a air-conditioner.
Use the unit in a humid place. In these
cases, the unit can not work. Unload the
disc and leave the unit on for about
one hour to evaporate the water.
Use soft cloth with a little neutral
detergent to wipe the cabinet, panel and
controls. Never use abrasive pater,
polishing powder or solvent like alcohol
and gasoline.
CLEANING
H
.
PRECAUTIONS FOR DISC
To keep the disc clean, do not touch
the play sides of the disc.
Do not attach paper or tape to the disc.
HANDLING DISC
Keep the disc away from direct sunlight
or heat sources.
Store the disc in a disc case after
playback.
Before playback, wipe the disc outwards
from the center with clean cloth.
CLEANING DISC
Do not use any type of solvent such as
thinner, benzine, commercially available
cleaners or antistatic spray.