Installation manual
The control panel and peripherals
17
2-3-3
Sol-PSTN, PSTN communicator module
The use of an optional Sol-PSTN module allows you to connect the PSTN line (Public Switched
Telephone Network line) to the control panel and to activate all the functions that use this
line:
• voice communicator
• automatic answerphone
• ARC services
If the control panel is not equipped with a SmartLogos30M voice board, voice calls will
produce a continuous beep for 30 seconds.
The red
COM
LED On solid indicates the ongoing progress of:
• a phone call over the PSTN line
• an ARC call over the PSTN line
When the control panel enclosure is closed, this LED will be Off.
2-3-4
SmartLogos30M
The optional SmartLogos30M voice board is necessary when voice functions are required by
the control panel:
• Voice mailbox, to record, play and delete voice messages.
• Voice dialer, to send voice calls to programmed phone contact numbers.
• Answerphone, to answer incoming calls. After the pre-set number of rings, the control
panel will pick-up and play the recorded answer message. During the call, the recipient can
type-in a valid PIN (enabled for over-the-phone control) and access the authorized
functions.
The SmartLogos30M voice board provides 500 voice message slots, 310 of which are pre-
recorded at factory. The messages are arranged in such way as to produce event-related voice
calls which clearly describe the related event. For this purpose it is necessary to use the
appropriate modules for communications via PSTN or GSM.
Table 2-17: Sol-PSTN - technical specifications
Temperature
from -10° to +40° C
Maximum humidity
75% (without condensation)
Environmental class
II
IP Protection grade
30
Dimensions
51 x 85 x 21 mm
Weight
54g
Table 2-18: Sol PSTN - description of parts
A
Terminal board for the line terminals
Earth connection
PSTN
Land-line connection (PSTN)
Internal telephone-line connection
B
COM
Red LED for communications over the PSTN
C
Control panel connector (on the under side)
%
$
&