24
Viewing the display screens
Installation and Programming manual
Chapter 9
Viewing the display screens
You can navigate on the display screens using keys
S
,
T
,
Ok
and
Esc
.
Figure 18 - Navigating on the display screens
9.1
Presentation screen
This screen will appear on first powerup and after every reset operation. It shows the model, firmware
version and date and time.
9.2
Output status screen
A series of screens will indicate the status of outputs OUT1, OUT2 and OUT3.
•
Electrical-current value
: indicates the realtime electrical-current value of each output.
•
Electrical-current and voltage values
: indicates the total realtime electrical-current value of the
outputs (the sum of the electrical currents of the 3 outputs) and the realtime voltage on the outputs.
•
Output status
: indicates the ON, OFF or Alert status (protection active) of each output.
Output status
Description
ON
24V across the terminals
OFF
0V across the terminals
ALERT
The channel is protected
Presentation screen
S P S 2 4 1 . 0 . 0
0 8 / 0 8 / 0 8 0 8 : 0 8
0 . 9 A 0 . 5 A 1 . 2 A
2 8 . 0
F a u l t 0 1 / 1 1
B a t t . d i s c o n .
Output sta
tus screen
2 . 6
O U T 1 O U T 2 O U T 3
Faults screen
L o g
L E D t e s t
R e s e t
Main menu
