12
User interface
Fire detection and extinguishant system
3.4
Status Bar
Icon
Function
Selection of this area allows you to enter a code and change the current user-access
level.
- 1 = Public level (no code entry)
- 2 = Supervision level (turn key or user code entry)
- 3 = Programming level (installer code entry)
Language
selection
If required by the configuration, this button will appear on the status bar.
Selection of one of the icons will change the language used by the control panel.
Day/Night
status
Selection of this icon (at level 2) allows you to switch from day mode to night mode or vice
versa.
Day Mode:
- The control panel runs the early warning phase before activating an alarm
triggered by a detector
- the sensitivity of the detectors is set in day mode
Night Mode:
- early warnings are not run
- the sensitivity of the detectors is set in night mode
- in the event of an alarm, if the sounders are silenced they will reactivate
automatically after a set time.
Mains
network
Selection of this icon displays a screen showing the voltages, currents and temperatures of the
power section.
Mains power-supply functioning properly
Indicates mains-power failure
Alarm
signaller status
Selection of this icon accesses (at level 2) a menu which allows manual deactivation, activation
and silencing of all fire alarm signalling devices.
Fire-alarm signalling devices (sounders, etc.) are in standby status and are operating
properly.
At least one fire alarm signalling device is in fault status. Contact your service dealer.
At least one fire alarm signalling device is disabled.
At least one fire alarm signalling device has been activated
Access level:1
