4. Installation of Air2-BS200
14
1
1
1
0
15
1
1
1
1
16
0
0
0
L
17
0
0
L
0
18
0
0
L
L
19
0
L
0
0
20
0
L
0
L
21
0
L
L
0
22
0
L
L
L
23
L
0
0
0
24
L
0
0
L
25
L
0
L
0
26
L
0
L
L
27
L
L
0
0
28
L
L
0
L
29
L
L
L
0
30
L
L
L
L
1. Put the intrusion control panel in maintenance mode.
2. Press button
P1
to access the address setting menu. During this phase the PRG LED will switch On
and the LEDs will show the current address.
3. Use the
P2
to reach the address to be assigned.
4. Use the
P1
button to assign the address and exit the menu (phase 0).
5. Include the wireless expansion boards in the control panel configuration, starting from the “ADD”
address (maximum “ADD” +9).
6. In the control panel configuration set the presence of the reader at the "ADD" address, simulation of
the transceiver associated with the wireless devices.
During normal operating status of Air2-Smarty/W, pressing and holding the
P2
button will allow you to view
(but not change) the transceiver address indicated on its LEDs.
4.2 Enrolling a wireless device
The enrolling procedure allows you to associate a wireless device INIM with the transceiver Air2-BS200
which acts in conjunction with the intrusion control panel.
This procedure varies depending on the control panel in use and the programming software or application:
1. Access the control panel programming.
2. Select the device to be enrolled in accordance with its type:
an input terminal, for a detector (motion detector, magnetic contact, etc.)
an output terminal, for an output device connected to a terminal of a magnetic contact Air2-
MC300
a keypad
a sounder/flasher
a key, for a remote control device, selecting as the associated reader the one simulated by the
transceiver
3. Set the device as “Wireless”.
10
Installation and programming manual- 100-DRAFT
