INHECO
08
Doc ID: 900372-002
October 2018
2.4.
labels
The identification label with part number and serial number also contains important
technical indications. The electrical specification on the label must meet your local
situation. The label is placed on the front of the HeatPAC. The identification label must
not be removed. If it has become illegible or falls off, it has to be replaced by a new
identification label. New labels can be ordered at INHECO. In case the label is missing
and you do not know the part number and serial number, they can also be read out with
the software (MTC/STC Demo Tool) which can be downloaded from our login section
on
www.inheco.com
. → Trouble Shooting and Support, page 19f..
Fig.2:
1000
INHECO GmbH
82152 Martinsried / Germany
03
PN:
SN:
Input: 24V
7900046-A
HeatPAC
2016-09
Rev.:
Imax: 4,16A
Product labels on the device
Fig.3:
INHECO GmbH
82152 Martinsried / Germany
1000
03
PN:
SN:
7900046-A
HeatPAC
2016-09
Rev.:
Storage and transportation conditions:
-10°C to +60°C [+14.0°F to +140°F],
10% to 80% RH, non condensing
Shipment labels on the package
Fig.4: Label on instrument
Caution Hot