INHECO HeatPAC User Manual Download Page 5

INHECO

05

Doc ID: 900372-002

October 2018

1.3. 

Explanation of abbreviations

The following items are used in this document

°C

Degree Celsius

Hz

Hertz [1/s]

K

Kelvin

kg

Kilogram

rhu

relative humidity

TEC

Thermo- Electric- Cooler (Thermoelectric Module, Peltier Element)

Vdc

Voltage direct current

adc

Ampere direct current

w

Watt

IVd

In Vitro Diagnostic

fda

Food and Drug Administration

AlP

Automated Labware Positioner from Beckman Coulter

MtC

Multi TEC Control controls up to 6 INHECO devices individually

sTC

Single TEC Control controls 1 INHECO device

Offset

The difference between the set temperature and actual value once the temperature 

is stable.

PT100

PT100 is a Resistive-Temperature-Detector (RTD). This sensor increases its re

-

sistance with increasing temperature.

Calibration

Calibration is the validation of specific measurement techniques and equipment. 

At the simplest level, calibration is a comparison between measurements - one 
of known magnitude or correctness - made or set with one device and another 
measurement made in as similar a way as possible with a second device.

1.4. 

warranty

The warranty period starts on the date of shipment. Any damage caused by operating 

the HeatPAC outside the specifications and guidelines leads to the loss of warranty. 

Broken seals on INHECO lead to the loss of warranty as well.
INHECO accepts only devices for inspection or repair which were not exposed to 

human or animal blood or fluids, chemical or biological fluids except of device which 

have been effectively decontaminated according to corresponding decontamination 

methods. → Decontamination and Cleaning, page 20ff..
Devices exposed to Biosafety level 3 and 4 Environments or radioactive or radiation 

materials are not accepted by INHECO for return.

1.5. 

How to contact INHECO

INHECO GmbH

Address

Fraunhoferstr. 11

82152 Martinsried

Germany

Telephone - Sales

+49 89 899593 120

Telephone - Techhotline

+49 89 899593 121

Fax

+49 89 899593 149

E-Mail - Sales

[email protected]

E-Mail - Technical -Hotline

[email protected]

Website

www.inheco.com

Technical Support & Trouble Shooting Instructions:

http://www.inheco.com/service/technical-support.html

Summary of Contents for HeatPAC

























Reviews: