INHECO
20
Doc ID: 900434-001
March 2018
4.5.2.
How to connect two devices (Master to slave)
• plug in the 15-pole SUB-D-Connectors
The slave will be connected to the lower male Connector and the master in the upper
female connector.
Fig.15:
Master unit connected as shown
in figure 12 on page 21
Slave unit needs no USB cable
or power cord
Two connected devices
4.5.3.
How to connect two devices (slave to slave)
• plug in the 15-pole SUB-D-Connectors
The 15-pole SUB-D-Connector of the slave connected with master will be connected
to the upper male Connector and of the second slave in the lower female
connector.
Fig.16:
slave unit connected connected
to master as shown in fig. 16
Slave unit needs no USB cable
or power cord
Two connected devices