80
80
200
160
324
7.5
7.5
7.5
For TL models, the distance between drilled holes will be as follows:
In models with transformers, it is the transformer which will be secured to the wall. The inverter will subsequently
be fixed to the transformer.
The three upper drilled holes are made first. The measurements to be used are shown in the figure. The bottom
hole must be made when the unit is suspended, as explained in Section “5.2 Fixing the unit to the wall”. The figure
shows the approximate distances between the horizontal line formed by the three upper drilled holes and where the
bottom hole will be. It also shows the approximate vertical distance to the level of the top edge of the inverter, which
will subsequently be attached to the transformer fixed to the wall.
240 - 250
100
100
75
75
75
150 - 165
Equipment edge
Note: values in mm.
Installation Manual
INGECON
®
SUN LITE
AAY2000IKI01
AAY2000IKI01
Rev. _B
Date: March 2011
Page 15
15
DOCUMENTACIÓN RELACIONADA
CATÁLOGOS
MANUALES
Manual de Usuario Ingecon
®
Sun LITE
AAY2000IKE01
Manual de Instalación Ingecon
®
Sun LITE
AAY2000IKH01
Manual de Instalación de los Accesorios de Comunicación
AAX2002IKH01
Ingecon
®
Sun Catálogo Comercial
PC00ISA01_A
Manual de instalación
INGECON
®
SUN LITE
AAY2000IKH01
AAY2000IKH01
Rev. _B
Fecha: Marzo 2011
Page 3