AAS2000IKI01
24
Installation manual
Ingeteam Power Technology, S.A.
The dimensions of the unit, for units with and without (TL) a transformer, are as follows: Bear in mind the clearance
between the pins of the fixing plates and the floor (if they are fitted):
840
560
760
1040
1708
980
1031
840
780
832
640
Once the location of the equipment has been selected, follow these steps:
1.
Mark the fixing points for the plates on the floor.
2.
Drill the floor with a recommended drill for the fixture supplied with the fastening plate.
3.
Anchor the fixing plates to the floor.
4.
Screw the fixing plates to the unit.
5.
Check that the unit is properly secured.