26
Operation
Ingeteam
ABA2013IQM01_ - Installation and usage manual
2.
Press
to access the language selection menu for the charging session. Once the charging process ends
the default language of the station will be enabled.
LANGUAGE
ENGLISH
LANGUAGE
ENGLISH
After accessing the language selection menu browse
through the options by pressing
or
.
Select the required language and press
.
3.
Identify the card using the reader under the display. When the station reads the card correctly a menu will
be displayed to select the charging process or to cancel the process.
SELECT OPTION
IMMEDIATE CHARGE
SELECT OPTION
IMMEDIATE CHARGE
To browse through the different options, press the buttons
or
.
When the
IMMEDIATE ChARGE
option is highlighted,
press
.
The
DEfERRED ChARGE
option is only shown if it is
enabled in the station.
4.
A screen will be displayed with a flashing connector. Connect the cable to the required electrical socket.
If the socket selected is type 2 connector (according to
IEC 62196-2
) the station automatically detects a
connection and follows the charging sequence defined by Standard
IEC61851
.
If the socket selected is type 3A connector (according to
IEC 62196-2
) the station automatically detects a
connection and follows the charging sequence defined by Standard
IEC61851
.
The station does not allow, nor is it designed for simultaneous use of both sockets. Only the selected
socked is enabled.
5.
When the vehicle is connected to the station the following screen is shown indicating that the charging
process has started correctly.
CHARGING
CHARGING
