Ingersoll-Rand W5002 Series, Product Information

Page: 4 / 76

EN-1 47543664001_ed4
EN
Product Safety Information
Intended Use:
These Cordless Impact Wrenches are designed to remove and install threaded fasteners.
WARNING
Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or cause personal injury.
Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire, personal
injury or property damage.
For additional information, refer to Cordless Impact Wrench Safety Manual Form 04581146, Battery Charger Safety Information Manual
Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com.
IQ
V
Power Control System
The intelligent control management system on this model can be adjusted with the power regulator. Select power mode by turning the dial at the
back of the tool and align the notch with the desired setting. Each mode provides intelligent power control in Forward and full power in Reverse.
Refer to illustration #1 on page 2.
Mode Name Description
Hand-tight
Torque-limiting, automatic shut-off
Wrench-tight
Mid-power Torque-limiting, continuous run
Max-power Maximum torque, continuous run
WARNING
\
Impact wrenches are not torque wrenches. Connections requiring specific torque must be checked with a torque meter after fitting with an
impact wrench. Improperly torqued fasteners may loosen and cause injury.
Product Specifications
Tool Model
Voltage Drive
Sound Level dB(A)
(EN60745)
V, DC Type Size †Pressure (L
p
) ‡Power (L
w
)
W5132 20 Square 3/8” 90 101
W5152 20 Square 1/2” 90 101
Tool Model
Battery Model - BL2012 Battery Model - BL2010, BL2022
Impacts per Minute
Vibration (m/s
2
)
(EN60745)
Impacts per Minute
Vibration (m/s
2
)
(EN60745)
bpm Level *K bpm Level *K
W5132 3100 14.5 2.1 3300 11.3 2.6
W5152 3100 14.5 2.1 3300 11.3 2.6
Tool Model - W5132, W5152 Battery Model - BL2012
Battery Model - BL2010,
BL2022
Intelligent Power Control
No Load Speed Shut-off
Max Torque Max Torque
Direction Mode Name ft-lbs (Nm) ft-lbs (Nm)
Forward
Hand-tight 0-800 Refer to Figure A Refer to Figure A
Wrench-tight 0-1600 Refer to Figure B Refer to Figure B
Mid-power 0-2100 230 (312) 240 (325)
Max-power 0-2100 280 (380) 340 (460)
Reverse ALL Max-power 0-2100 295 (400) 365 (500)
† K
pA
= 3dB measurement uncertainty Conforms to UL STD. 60745-1 & 60745-2-2.
‡ K
wA
= 3dB measurement uncertainty Certified to CSA STD. C22.2 No. 60745-1 & 60745-2-2.
* K = Vibration measurement uncertainty
●
●
●