Ingersoll-Rand R3000 Series, User Manual

Page: 27 / 44

EN
48624340_ed5 EN-1
Product Information: Cordless Ratchet Wrench
Product Safety Information
Intended Use:
These Cordless Ratchet Wrenches are designed to remove and install threaded fasteners.
WARNING
Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fi re and/or
serious injury. Save all warnings and instructions for future reference.
Responsibly recycle or dispose of Batteries.
Do not puncture or burn Batteries. Improper disposal may endanger the environment or
cause personal injury .
Only use Tools with appropriate voltage Ingersoll Rand Batteries and Charger. Use of any other batteries may create a risk of fi re,
personal injury or property damage.
For additional information, refer to Cordless Ratchet Wrench Safety Information Manual Form 80232929, Battery Charger Safety
Information Manual Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrandproducts.com
Product Speci fi cations
Tool
Model
Battery
Model
Voltage Drive No Load
Speed
Recommended
Torque Range
Max. Torque
Sound Level dB(A)
(EN60745)
Vibration (m/s 2 )
(EN60745)
V, DC inch rpm ft-lbs (N-m) ft-lbs (N-m) † Pressure (L
p
) ‡ Power (L
w
) Level *K
R3130
BL2005
BL2012
BL2010
BL2022
20
3/8 0-225 10-45 (14-61) 54 (73) 86 97 3.2 1.0
3/8 0-225 10-45 (14-61) 54 (73) 86 97 2.7 0.7
R3150
BL2005
BL2012
BL2010
BL2022
20
1/2 0-225 10-45 (14-61) 54 (73) 86 97 2.8 0.7
1/2 0-225 10-45 (14-61) 54 (73) 86 97 2.5 0.7
† K
pA
= 3dB measurement uncertainty *K = Vibration measurement uncertainty
‡ K
wA
= 3dB measurement uncertainty
NOTICE
When using this product as a manually-operated ratchet wrench, do not exceed the maximum torque listed in the table. Exceeding this
torque may cause damage to the product and will void the warranty.
Product Operation
These models feature a variable trigger and an automatic shut-o ff .
The variable trigger feature allows an operator to regulate the power output of the tool through manipulation of the trigger lever. Power
output will increase as the trigger lever is pressed in, with maximum power output occurring when the trigger lever is fully depressed. Power
output will decrease as the trigger lever is released.
The automatic shut-o
ff feature shuts o ff power to the motor when the motor is stalled. When tightening a fastener, the motor will stall when
the tool is unable to tighten the fastener any further, so automatic shut-o ff will occur at this condition. When attempting to loosen a fastener,
the motor will stall if the tool is unable to move the fastener, so automatic shut-o ff will occur at this condition also. When automatic shut-o ff
occurs, the trigger lever must be fully released and then pressed again to restart the tool. After automatic shut-o ff occurs, the tool can continue
to be used as a manually-operated ratchet, provided that the maximum torque limit speci fi ed for that particular model is not exceeded.
Lubrication
Maintenance frequency is shown in a circular arrow and de fi ned as h=hours, d=days and m=months of actual use.
3
2
3m
6m
30d
1
(Dwg. 48623839)
1 2 3
IR # cm
3
IR # cm
3
IR # cm
3
70 1 70 2 67 1
Inject between ratchet
housing and yoke to
lubricate drive bushing.
Disassemble ratchet head
and lubricate components.
Disassemble gearing and
lubricate components.
Parts and Maintenance
All other maintenance and tool repair should only be carried out by an authorized Service Center. For the nearest location, visit
ingersollrandproducts.com
Refer all communications to the nearest
Ingersoll Rand
O ffi ce or Distributor.
•
•
•