Ingersoll-Rand QA6 series, Maintenance Information, Page: 51 / 94

16601056_ed1 51
9. Grease ball groove of lower race (14) with Ingersoll Rand # 40036-1 Grease and slide on driver shaft (9).
10. Grease Plunger’s (12) outer surface with Ingersoll Rand # 40036-1 Grease. Insert Plunger Into Driver Shaft’s (9) Hole through upper driven
jaw’s hole. See section view below for the proper placement.
Note : Make sure that the balls placed in step (3) do not walk out.
11. Grease 3 X cross holes of driver shaft with
Ingersoll Rand
40036-1 Grease and Insert 2 X Plunger Ball 2.38mm (19) Per Hole. See section view
below for the proper placement.