Ingersoll-Rand QA6 series, Maintenance Information, Page: 32 / 94

32 16601056_ed1
Note : When spacing is correct and motor is rotating freely, motor and fixture 80187388 / 16604845 should fall to vertical orientation of pin and
center screw, if motor does not come free and screw can not be tightened further, motor must be completely disassembled.
Note
: After Motor is clamped in 80187388 / 16604845 tooling, the rotor may already spin freely. If this occurs, follow the same assembly
procedure procedure, after the screw (bottom out against back bearing), continue tightening about 10 degrees. Rotor should still spin freely.
This is to ensure proper rotor spacing during normal tool operation.
First Stage Module Exploded View
4
2
3
5
1
6
(Dwg. RG_53449310)
First Stage Module Parts List
Item Part Description Part Number
1st Stage Gear Assembly 132023 132022 132020 132021
1 Front Cap 132004 132004 132004 132004
2* Needle Roller Bearing Kit QA6-1-K24 QA6-1-K24 QA6-1-K24 QA6-1-K24
3* Planet Gear Kit QA6-K10-29 QA6-K10-25 QA8-K10-29 QA8-K10-13
4 Spindle Assembly QA6-A8-9P50 QA6-A8-6P54 QA6-A8-7P80 QA8-A8-3P86
4A+ Bearing 37x20x9 119277 119277 119277 119277
4B+ Circlip 126293 126293 126293 126293
5 Gear Case 132011 132013 132011 132011
6 Pinion - - - QA6-17-14
+ Not Illustrated.
* See Subassembly Exploded View and Parts List for Detail.