2
45586039_ed1
WARNING
General Product Safety Information
Read and understand this manual before operating this product.
It is your responsibility to make this safety information available to others that will operate this product.
Failure to observe the following warnings could result in injury.
WARNING
Product Safety Information - When Placing the Product in Service
These motors are designed for gas operation at a maximum inlet pressure of 150 psig. It is not totally sealed in dynamic operation
since the exhaust must be vented or piped away and there is a possibility of leakage around the output shaft when rotating.
When assembling a gas operated motor always perform the steps as directed in the section titled Gas Operation Test Procedure.
Always operate, inspect and maintain this motor in accordance with American National Standards Institute Safety Code for Portable
Air Tools (ANSI B186.1).
For safety, top performance and maximum durability of parts, operate this motor at 150 psig (10.3 bar/1030 kPa) maximum air/gas
pressure at the inlet with 1/2” (13 mm) air/gas supply hose.
Always turn off the air/gas supply and disconnect the air/gas supply hose before installing, removing or adjusting any accessory on
this motor or before performing any maintenance on this motor.
Do not use damaged, frayed or deteriorated air hoses and fittings.
Do not lubricate motor with flammable or volatile liquids such as kerosene, diesel or jet fuel.
Do not remove any labels. Replace any damaged label.
WARNING
Product Safety Information - When Using the Product
Caution should be taken when operating this motor on gas because of the danger of fire, explosion or inhalation.
Always wear eye protection when operating or performing maintenance on this product.
Always wear hearing protection when operating this product.
Anticipate and be alert for sudden changes in motion during start up and operation of any motor.
Keep hands, loose clothing and long hair away from rotating end of motor.
Motor shaft may continue to rotate briefly after air/gas line is removed.
Use accessories recommended by Ingersoll Rand.
This motor is not insulated against electric shock.
Safety Symbol Identification
Wear Respiratory
Protection
Wear Eye
Protection
Wear Hearing
Protection
Read Manuals Before
Operating Product
Safety Information - Explanation of Safety Signal Words
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
property damage.
NOTICE
Indicates information or a company policy that relates directly or indirectly to the safety of personnel or
protection of property.
NOTICE
The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased Motor performance and
increased maintenance, and may invalidate all warranties.
Ingersoll Rand is not responsible for customer modification of motors for applications on which Ingersoll Rand was not consulted.
Repairs should be made only by authorized, trained personnel. Consult your nearest Ingersoll Rand Authorized Servicenter.
■
■
■
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Summary of Contents for MVA017B/VSM-5842
Page 7: ...Notes...
