Ingersoll-Rand MULTI-VANE 92N Series, Operation And Maintenance Information

Page: 2 / 16

2 03528635_ed7
EN
WARNING
General Product Safety Information
Read and understand this manual before operating this product.
It is your responsibility to make this safety information available to others that will operate this product.
Failure to observe the following warnings could result in injury.
WARNING
Always operate, inspect and maintain this motor in accordance with American National Standards Institute Safety Code for
Portable Air Tools (ANSI B186.1).
For safety, top performance and maximum durability of parts, operate this motor at 90 psig (6.2 bar/620 kPa) air pressure at the inlet with
1 1/4” (32 mm) air supply hose.
Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this motor or
before performing any maintenance on this motor.
Keep hands, loose clothing and long hair away from rotating end of motor.
Anticipate and be alert for sudden changes in motion during start up and operation of any motor.
Motor shaft may continue to rotate briefly after throttle is released.
Do not lubricate motor with flammable or volatile liquids such as kerosene, diesel or jet fuel.
Do not remove any labels. Replace any damaged label.
Use accessories recommended by
Ingersoll Rand
.
This motor is not designed for working in explosive atmospheres.
This motor is not insulated against electric shock.
When installing one of these Motors for operation on compressed air, refer to the schematic diagram Drawing TPB-491.
NOTICE
The use of other than genuine Ingersoll Rand replacement parts may result in safety hazards, decreased tool performance and increased
maintenance, and may invalidate all warranties.
Ingersoll Rand is not responsible for customer modification of tools for applications on which Ingersoll Rand was not consulted.
Repairs should be made only by authorized, trained personnel. Consult your nearest
Ingersoll Rand
Authorized Servicenter.
It is the responsibility of the employer to place the information in this manual into the hands of the operator.
Safety Symbol Identification
Wear Respiratory
Protection
Wear Eye
Protection
Wear Hearing
Protection
Read Manuals Before
Operating Product
(Dwg. MHP2598)
Safety Information - Explanation of Safety Signal Words
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
property damage.
NOTICE
Indicates information or a company policy that relates directly or indirectly to the safety of personnel or
protection of property.
■
■
■
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•