background image

WARRANTY

Ingersoll Rand Limited Warranty

Ingersoll Rand Company

 (“

IR

”) warrants to the original user its material handling

products (“Products”) to be free of defects in material and workmanship for a period

of one year from the date of purchase. 

IR

 will, at its option either (1) repair, without

cost, any Product found to be defective, including parts and labor charges, or (2)

replace such Products or refund the purchase price, less a reasonable allowance for

depreciation, in exchange for the Product. Repairs or replacements are warranted for

the remainder of the original warranty.

If any Product proves defective within its original one-year warranty period, it should

be returned to any Authorized Product Service Distributor, transportation prepaid with

proof of purchase or warranty card. This warranty does not apply to Products which

IR

 has determined to have been misused or abused, improperly maintained by the

user, or where the malfunction or defect can be attributed to the use of non-genuine

IR

 repair parts.

IR MAKES NO OTHER WARRANTY, CONDITION OR REPRESENTATION OF ANY KIND

WHATSOEVER, EXPRESSED OR IMPLIED, STATUTORY OR OTHERWISE, AND ALL

IMPLIED WARRANTIES AND CONDITIONS RELATING TO MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED.

IR

's maximum liability is limited to the purchase price of the Product and in no event

shall 

IR

 be liable for any consequential, indirect incidental or special damages of any

nature arising from the sale or use of the Product, whether in contract, tort or

otherwise.

Note: Some states do not allow limitations on incidental or consequential damages,

so that the above limitations may not apply to you. This warranty gives you specific

legal rights and you may also have other rights which may vary from state to state.

Fulcrum series electric winch, product code 405-002: 2 year warranty.

Winch and Hoist Solutions Extended Warranty This option provides a price for

extending the 

Ingersoll Rand

 Winch and Hoist Solutions Warranty from the standard

one (1) year to two (2) years from the date of purchase. All other provisions of the

standard warranty to remain in effect.

For additional information or quotations for warranties falling outside of these

parameters, please contact your Client Services Representative with your

requirements.

8

Form MHD56465 Edition 3

Summary of Contents for Liftchain LC2H060S













Reviews: