30
4.14 SEPARATOR TANK SCAVENGE
CHECK VALVE/SCREEN/ORIFICE
TOOLS REQUIRED
Open end wrench
Screwdriver
PROCEDURE
Disconnect tubing at each end of check valve/screen/
orifice assembly.
Check orifice and clean if required. Use suitable small
screwdriver or knife and press screen retainer orifice
from its mating fitting (See Figure 4.14-1). Be careful
not to damage flared end of fitting or o-ring. Wash
screen and housing in safety solvent and blow dry.
Press the check valve/screen/orifice into fitting block.
Assemble the check valve/screen/orifice assembly to
the tubing lines. The fitting must be re-installed with
the screen on the upstream side of the orifice as indi-
cated by the flow arrow (See Figure 4.15-1).
FIGURE 4.14-1 SEPARATOR TANK SCAVENGE
CHECK VALVE/SCREEN/ORIFICE
INLET
SPRING
HOUSING
SCREEN
ORIFICE
VITRON O-RING
CHECK
VALVE
4.15 COOLER CORES
INSPECTION
Visually check the cooler cores for build up of dirt,
dust, lint or other foreign material.
Using an OSHA approved air gun, blow air through the
cooler cores in the opposite direction of normal air
flow.
Remove cooler box outer panel and clean all loose
material that blew from the coolers into the fans.
Reinstall the cooler box outer panel.
Start unit and verify proper operation.
Summary of Contents for EP 20-ESP
