4
Any model listed can be changed to a front exhaust tool by reversing the Flow Ring and aligning the indicator marks
with the letter “F” on the Housing. To order a front exhaust tool from the factory, substitute the letter “F” for the
letter “R” in the model number. Example: CA200RA812 Rear Exhaust Model becomes CA200FS812 Front Exhaust
Model.
HOW TO ORDER CUSTOM MODELS
1.
To order a tool with a Locking Lever, select the desired
model and add and “L” to the end of the existing
number. Example: CA200RS812L
Anytime a tool is ordered with a Low–Profile
Concentric Flange, it will come equipped with a
Locking Lever from the factory.
2.
To order a tool with a Low–Profile Concentric Flange,
select the desired rear exhaust model and add a “C” to
the end of the existing number. Concentric Flanges are
not available for front exhaust models.
Example: CA200RS812C
