Ingersoll-Rand 70P3, Operation And Maintenance Manual, Page: 3 / 23

3
PLACING TOOL IN SERVICE
LUBRICATION
Ingersoll–Rand No. 50 Ingersoll–Rand No. 67
Ingersoll–Rand Fluid Part
No. EQ106S–400–1
Always use an air line lubricator with these tools.
We recommend the following Filter–Lubricator–Regulator
Unit:
For USA – No. C18–03–FKG0–28
After each 20 000 cycles, or as experience indicates, drain
and refill the Impulse Unit Drive Assembly as instructed
in this manual using the Fluid Replacement Kit
(Part No. EQ106S–K400). Lubricate the hex drive and the
output shaft before assembly.
MAIN LINES 3 TIMES
AIR TOOL INLET SIZE
TO
AIR
SYSTEM
TO
AIR
TOOL
LUBRICATOR
REGULATOR
FILTER
BRANCH LINE 2 TIMES
AIR TOOL INLET SIZE
DRAIN REGULARLY
COMPRESSOR
(Dwg. TPD905–1)
SPECIFICATIONS
Model Type of
Handle
Chuck/Drive Free
Speed
Recommended Torque Range
in. rpm Soft Draw
ft–lb (Nm)
Hard Slam
ft–lb (Nm)
70P3 pistol 3/8” square dr. 7,000 36–56
(50–76)
35–48
(48–65)