5
Preparing for Installation
Accessories
In addition to product literature, the following accessories are supplied with this unit. The type and
quantity may differ, depending on the model.
Location Considerations
Insulation A
Insulation B
Insulation C
Flexible hose
clamp
Flexible hose
Cable tie
When deciding on a location for the indoor unit, the following factors must be considered:
•
The air inlet and outlet must be unobstructed.
•
The wall or ceiling must support the weight of the unit.
•
The wall or ceiling must not be subject to vibration.
•
Pre-plan for easy and short routing of the refrigerant tubing and wiring to the outdoor unit.
•
The air must circulate freely in the area to be cooled/heated.
•
Sufficient clearance must be maintained around the unit.
•
Condensate must be managed correctly and safety away from the unit.
•
The unit should be installed in a way that prevents unauthorized access.
•
The unit must not be installed in an area that is damp or could come into contact with water
(such as a laundry room).
•
The unit must not be exposed to direct sunshine or to other direct heat sources.
•
The filter must be able to be removed and cleaned easily.
•
The unit should be placed as far as possible from fluorescent lights so the remote control is not
subject to interference.
•
Care should be taken to prevent harmonics generated by loose or unsupported material in close
proximity to a running unit.
•
The unit must not be installed in an area that is exposed to salt, machine oil, sulfide gas, or
corrosive environmental conditions.
