Ingersoll-Rand 10000B20, Parts, Operation And Maintenance Manual

Page: 45 / 53

44
MOTOR AND REDUCER ASSEMBLY CHART
Chain Drive Winches (item 26 - without Torque Limiter option)
Winch
Model
Number
Motor
HP
Motor
Mount
Position
*Reducer
Gear Ratio
Amps at
Full Load
380V
Continuous
Duty
380V (50 cycle) Three
Phase
Amps at
Full Load
575V
Continuous
Duty
575V (60 cycle) Three
Phase
Standard Marine Standard Marine
1300A20 1 P 43:1 ---
1300B20 1 P 53:1 2.2 1.55
1400A40 2 P ---
1400B40 2 P 27:1 3.65 71084511 71109326 2.4
2000A20 1.5 P 40:1 ---
2000B20 1.5 P 53:1 2.85 71109326 1.9
2000A40 3 P 25:1 ---
2000B40 3 P 26.8:1 5.2 3.45 71079693
3000A40 5 P ---
3000B40 5 P 40:1 9.2 71044069 71044077 5.8 71044044 71044051
4000A20 3 P ---
4000B20 3
P 73.1:1 5.2 3.45 71044127 71044135
RA 85.6:1
P 96:1 71044143 71044150
4500B50 7.5 P 28.8:1 11.6 71044226 71044234 7.7 71044200 71044218
6000B20 5 P
70:1 9.2 54482 5.8 54684
58:1 71300768
6000B40 7.5 P 52:1 11.6 7.7 52013
10000B20 7.5 P 99:1 11.6 71312995 7.7 71314801
10000B40 15 P 40.6:1 22 71288112 71115406 14.5
15000B20 12 P 103:1 19 12.6
22000B30 25 P 95:1 39 26.5
Unless otherwise specified motor and reducer assemblies are manufactured for Ingersoll-Rand by Eurodrive
* For 575V (60 cycle) only. Slightly modified ratios are used for 380V (50 cycle) motors
P = Motor mounted parallel to drum RA = Motor mounted at right angles to drum
Contact your nearest distributor or Ingersoll-Rand Material Handling Office for part number information.