Ingenieurbüro Mulka
The world of bit streams is our business.
© 2018
– Ingenieurbüro Mulka
6
1.3 Safety
The unit described has been designed to the latest technical parameters and complies with
all current national and international safety requirements. It operates on a high level of
reliability because of long-term experience in development and constant and strict quality
control in our company.
This manual contains basic safety instructions that must be observed during configuration
and operation. It is essential that the user reads this manual before the system is used and
that a current version of the manual is always kept close to the equipment.
1.4 General safety requirements
To keep the technically unavoidable residual risk to a minimum, it is absolutely
necessary to observe the following rules:
•
Transport, storage and operation of the unit must be under the permissible
conditions only.
•
Installation, configuration and disassembly must be carried out only by trained
personal on the basis of the respective manual.
•
The unit must be operated by competent and authorised users only.
•
The unit must be operated in good working order only.
•
The device must be protected from water.
•
The device may only be installed in indoor rooms.
•
The device may only be cleaned with a dry cloth.
•
Any conversions or alterations to the unit or to parts of the unit (including
software) must be carried out by trained personnel authorised by the
manufacturer. Any conversions or alterations carried out by other persons lead
to a complete exemption of liability.
•
Only specially qualified personnel are authorised to remove and override
safety measures, and to carry out the maintenance of the system.
•
External software is used at one’s own risk. Use of external software can affect
the operation of the system.
•
Use only tested and virus-free data carriers.
Although the DABRF-HWU and DABRF-RM has an integrated fan for proper
cooling, it is recommended to have sufficient ventilation.
The ambient temperature of the system should be within the range of +5°C and
+40°C. This threshold is specially to observe if the system is inserted in a rack.
During operation humidity must range between 30% and 85%.
Incorrect ambient temperature and humidity can cause functional deficiencies.
Improper use of the unit can lead to a loss of warranty claim.
