Terminal User Guide
Troubleshooting
83
Supervisor Sub-Menus
There are three Supervisor sub-menus. They are the Password menu,
the Config menu and the Shortcut menu. They allow access to extended
options within the Supervisor menus.
To access the Password menu press the
menu
key
twice
, then choose
SUPERVISOR
by pressing the
F3
key. You will be asked to type your
current supervisor password, and confirm this by pressing the
enter
key,
and choose
PASSWORD
by pressing the
F2
key.
MENU, MENU, F3, [password], ENTER, F2
Below is a summary of the functions within the Password menu and
how to access them, and what they do.
Some Supervisor functions MUST only be used when instructed
to do so by the terminal Helpdesk.
Password Menu Screen
DELETE ACQ
F1
Deletes all datasets for one or all acquirers from the
terminals memory. Do not use this feature unless
instructed to do so by the terminal Helpdesk.
MAC RESET
F2
Allows the Message Authentication Code (MAC)
key to be reset to the initial value for one or all
acquirers. Do not use this feature unless instructed
to do so by the terminal Helpdesk.
TMS RESET
F3
Allows
the
secure
password
used
for
communications to the TMS to be reset to the initial
value. Do not use this feature unless instructed to
do so by the terminal Helpdesk.
CHANGE PWD
F4
Allows the Supervisor password (and/or Refund
password) to be changed. The new password must
be used for all future password requests.
Summary of Contents for iWL200 Series
Page 1: ...iWL200 Series...
