Terminal User Guide
Troubleshooting
79
Supervisor Password Change (Initial Transaction)
If you have not changed the Supervisor password before you process
your first transaction the terminal will prompt you to change the
password from the default during the transaction.
A New Password
Must Be Selected
During the transaction, you will be
prompted that the password needs to be
changed, press any key to continue.
ENTER NEW PASSWORD
****
Enter a new password and press the
enter
key.
RE-ENTER PASSWORD
****
Re-enter the new password and press the
enter
key.
Parameter Saved
A confirmation will be shown if the two
entries match and the password has been
changed.
The terminal will continue as normal, refer to the instructions for
transaction type that you chose to complete the transaction.
Refund Password
Your terminal is configured to use the Supervisor password to protect
both the Refund and the Supervisor functions. If you would like a
separate password enabled in order to protect the Refund function
please contact the terminal Helpdesk.
This feature could be used to allow one member of staff the added
ability to perform a Refund; while allowing another member(s) of staff
the ability to perform the Supervisor functions.
Summary of Contents for iWL200 Series
Page 1: ...iWL200 Series...
