Ingenico iCT2 Series Operating Manual Download

Page: 78 / 146

SKYZER TECHNOLOGIES

PAGE 78 OF 146

R009

10.1.2

EXPIRED STORED PRE-AUTHORISATION TRANSACTIONS

If the terminal supports pre-authorisations such as Hospitality transactions, then

the terminal provides functionality for merchants to manage the stored pre-

authorisations.
When the pre-authorised transactions are executed, a pre-defined retention

period is set by default to 7 days, when at that time the transactions will be

recalled and displayed after a successful merchant logon is initiated for the

merchant to review and take action i.e. process completion.

Step Terminal Display

Description

1.0

PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU

Press MENU key and then scroll through using down arrow key until SUPERVISOR

MENU is shown on the display.
Press the corresponding number key or ENTER to access supervisor menu.

2.0

SUPERVISOR MENU
1.XTRA
2.LOGON
3.

DUPLICATE RECEIPT

Press the corresponding number key or down arrow key to select LOGON to

perform a merchant logon.

2.0

1 Merchant 1
2 Merchant 2
3 Merchant 3
4 ALL MERCHANTS

Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by

ENTER.
Press CLEAR or CANCEL to select a different merchant.

3.0

PROCESSING NOW

PROCESSING NOW will be displayed.

4.0

ACCEPTED

ACCEPTED will be displayed when the terminal has made a successful connectivity

with Paymark and prints of the receipt.

5.0

EXPIRED PRE-AUTH
TRANS COUNT XXXX

VIEW TRANS Y/N

Press ENTER to view the expired pre-auth transactions that are stored on the

terminal and proceed with completing them or CLEAR to not view the transaction

and proceed with step 21.0.

EXPIRED STORED HOSPITALITY TRANSACTION

INGENICO ICT2XX 2017 PAYMARK SOFTWARE OPERATING GUIDE

VERSION 1.0

Summary of Contents for iCT2 Series



















































































































































Search results

Summary of Contents for iCT2 Series

Reviews:

Related manuals for iCT2 Series

Brands by name

Popular brands

Ingenico iCT2 Series, Operating Manual

Search results

Summary of Contents for iCT2 Series

Reviews:

Related manuals for iCT2 Series

Brands by name

Popular brands