Loading, Transport and Storage
dizzer
®
L Series horizontal
– Assembly Instructions 2.2(2019-06) E inge
Page 27 of 60
© inge GmbH
4.3
Loading
Fork-Lift Truck Requirements
To lift and transport pallets in a longitudinal direction, only use fork-lift trucks or lift trucks with a
fork length of 120 cm or more.
The use of removable fork extensions or telescope extensions is permissible as long as a fork
length of at least 120 cm is ensured when transporting the pallet in the longitudinal direction.
Stackability
The following maximum stacking heights must be observed:
Single Unit Packaging
(1 UF element per cardboard box)
Multi Unit Packaging
(max. 16 per wooden pallet)
Module type
Positioning
Stacking Height
Positioning
Staking Height
dizzer
®
L 0.9 MB 40 PB
horizontal
4
horizontal
3x
dizzer
®
L 0.9 MB 55
horizontal
4
horizontal
3x
Weight load
On the basis of the delivery scope, check the total weight with respect to the permissible weight
load of the truck.
Transport Protection
Ensure that the equipment is transported safely by securing it properly in the truck.
Load Distribution
When loading, fill the loading surface without gaps to prevent the transported equipment from
tipping, slipping, etc.
Low packages over which other, higher packages could tip in case of emergency braking must
not be positioned at the bulkhead.
